New member to the site - 1962 Starfire
#1
New member to the site - 1962 Starfire
Hello from the Pacific Northwest! Been watching this forum for a little while, but decided to finally make an account. Let’s get straight to the car!
I purchased this 1962 Oldsmobile Starfire last June, an original California car that made its way up to Washington State in the mid-1980s. It’s only been in the hands of 2 families before me, and it spent most of its time in the hands of the original owner and his family. This car started it’s life as a company car, gifted to him by Kraft Foods in San Francisco back in the day, as he was a manager of one of their departments. When he passed away, his daughter inherited the vehicle in 1985 and drove it until engine problems started to occur in 1999. Her husband worked on it for a bit until she passed away, and then he lost interest in it. It was acquired by the previous owner in 2010, taken apart at the time and it transferred ownership. After 7 years of he got it finished up and in working order to the best of his ability. Although the car still needs plenty of TLC, the time and effort he put in shows. I feel very blessed to have such a special vehicle, and plan on getting it as close as possible to its original 1962 condition.
While I do love the brighter red, it originally wore the beautiful “Garnet Mist” as Oldsmobile called it. The paint isn’t perfect, so I’ll have it professionally done sometime in the future, likely to its original shade. The two-tone I’m keeping, it’s rarely seen compared to the solid color vehicles, and I think it looks much better!
Just about all the trim is on the car, besides a couple tiny bits on the door behind the lock.
There’s not much work to be done back here besides replacing the antenna with a correct power one. I like to say this car has tailfins, just ones that run horizontally instead of vertically!
Moving on to the interior, you can see the loads of options this vehicle had, including (but not limited to) factory AC, power windows, and a power seat.
Let’s finish with the 394 V8. It has its issues starting, but it runs like a Swiss watch once it fires.
That sums it up, I hope you guys enjoyed reading this Starfire’s story. I look forward to many more posts on this forum!
I purchased this 1962 Oldsmobile Starfire last June, an original California car that made its way up to Washington State in the mid-1980s. It’s only been in the hands of 2 families before me, and it spent most of its time in the hands of the original owner and his family. This car started it’s life as a company car, gifted to him by Kraft Foods in San Francisco back in the day, as he was a manager of one of their departments. When he passed away, his daughter inherited the vehicle in 1985 and drove it until engine problems started to occur in 1999. Her husband worked on it for a bit until she passed away, and then he lost interest in it. It was acquired by the previous owner in 2010, taken apart at the time and it transferred ownership. After 7 years of he got it finished up and in working order to the best of his ability. Although the car still needs plenty of TLC, the time and effort he put in shows. I feel very blessed to have such a special vehicle, and plan on getting it as close as possible to its original 1962 condition.
While I do love the brighter red, it originally wore the beautiful “Garnet Mist” as Oldsmobile called it. The paint isn’t perfect, so I’ll have it professionally done sometime in the future, likely to its original shade. The two-tone I’m keeping, it’s rarely seen compared to the solid color vehicles, and I think it looks much better!
Just about all the trim is on the car, besides a couple tiny bits on the door behind the lock.
There’s not much work to be done back here besides replacing the antenna with a correct power one. I like to say this car has tailfins, just ones that run horizontally instead of vertically!
Moving on to the interior, you can see the loads of options this vehicle had, including (but not limited to) factory AC, power windows, and a power seat.
Let’s finish with the 394 V8. It has its issues starting, but it runs like a Swiss watch once it fires.
That sums it up, I hope you guys enjoyed reading this Starfire’s story. I look forward to many more posts on this forum!
#2
Welcome to the site! Congratulations on finding the car! Thank you for sharing pictures and the story behind your car. Too many of our cars don't have a history that can be traced like yours.
John
John
#4
Welcome. The car is beautiful and has the history! I wish you many happy miles..
It appears to have had the steel line between the fuel pump and the carburetor replaced with rubber hose and a filter. The steel line is safer from a leak/fire perspective, consider changing it back to steel. Rubber is fine on the suction side of the pump, not on the pressure side.
It appears to have had the steel line between the fuel pump and the carburetor replaced with rubber hose and a filter. The steel line is safer from a leak/fire perspective, consider changing it back to steel. Rubber is fine on the suction side of the pump, not on the pressure side.
#5
Welcome to Classicoldsmobile.com.
Come and join the "Darksiders" (61 thru 70 big car owners) at this thread;
61-70 Big Cars, "Darksiders" unite ! - ClassicOldsmobile.com
Come and join the "Darksiders" (61 thru 70 big car owners) at this thread;
61-70 Big Cars, "Darksiders" unite ! - ClassicOldsmobile.com
#7
Welcome!
Nice clean example.
The older I get the more I appreciate the early 60s big cars. Those spinner hubcaps optional? They look like older mid-late 50s Fiestas or aftermarket, "period" cool?
Darker L code Garnet Red would look good with the interior and white.
Hard starting can be a few different things or a few combinations of things.
The best way to trouble shoot is to NOT throw parts at it. Find the problem(s) by systematically going through each engine system. Let us know when you need help.
Sounds fuel-related if it runs good after the initial hard start. Choke set ok?
Do yourself a favor and start cleaning all electrical connections. As many as you can find even bulb sockets. Grounds are your friend.
In the attachment are some tips and safety-related suggestions that may not be on your radar yet. Dont want to see it or you get hurt.
Steve
Nice clean example.
The older I get the more I appreciate the early 60s big cars. Those spinner hubcaps optional? They look like older mid-late 50s Fiestas or aftermarket, "period" cool?
Darker L code Garnet Red would look good with the interior and white.
Hard starting can be a few different things or a few combinations of things.
The best way to trouble shoot is to NOT throw parts at it. Find the problem(s) by systematically going through each engine system. Let us know when you need help.
Sounds fuel-related if it runs good after the initial hard start. Choke set ok?
Do yourself a favor and start cleaning all electrical connections. As many as you can find even bulb sockets. Grounds are your friend.
In the attachment are some tips and safety-related suggestions that may not be on your radar yet. Dont want to see it or you get hurt.
Steve
Last edited by droldsmorland; October 8th, 2023 at 05:37 PM.
#8
You have a late build car so I figured it came Chariot Red. Garnet is a good color for a 62 though, and I see a lot more 62s with contrast color roof than I do with body and roof the same color.
Those tiny moldings are missing on a lot of 62 Starfires. I don't think he's made them yet but check with Oldskeeper here on CO, or his website is www.jaswest.com . Steve reproduces the aluminum side panels among other things for early 60s big Oldsmobiles.
Hard starting could be fuel, choke, or ignition related. Is car still on points ignition system or has it had an electronic conversion installed? Ethanol fuel will contribute to hard starting on a carbureted engine too.
Those look like aftermarket 56 Fiesta caps. They're probably on it because someone got tired of fooling with the 1962 clip-on full wheelcovers. That or it was changed to 15" wheels in an effort to find affordable tires.
JasWest or Fusick www.fusick.com are your best bets for what little is out there for your Starfire.
Those tiny moldings are missing on a lot of 62 Starfires. I don't think he's made them yet but check with Oldskeeper here on CO, or his website is www.jaswest.com . Steve reproduces the aluminum side panels among other things for early 60s big Oldsmobiles.
Hard starting could be fuel, choke, or ignition related. Is car still on points ignition system or has it had an electronic conversion installed? Ethanol fuel will contribute to hard starting on a carbureted engine too.
Those look like aftermarket 56 Fiesta caps. They're probably on it because someone got tired of fooling with the 1962 clip-on full wheelcovers. That or it was changed to 15" wheels in an effort to find affordable tires.
JasWest or Fusick www.fusick.com are your best bets for what little is out there for your Starfire.
#9
If you have a good non-rotted rear bumper and the SlimJim functions reasonably well you're way ahead of the game with this Starfire. You need these if you don't already have them. Both of them, preferably original print copies. Reprints and CD-ROM copies lose critical detail. Same books the dealer mechanics used to service your Starfire 60 years ago.
#14
First off, thank you all for the warm welcome, advice, and kind words! I’m liking this place already.
Wow, didn’t even know these had that steel line, there’s a lot that’s not perfect or original in my engine bay. I looked up pictures and saw exactly what you mean. I’ll need to look into finding that part but I bet that’s near impossible. If anyone has a lead on that please let me know.
When I first bought it I assumed it was originally Chariot red too, but the Fisher body tag states otherwise. It was originally a Garnet Mist and Provincal White vehicle. The previous owner said he repainted it, and the leftover paint was included in the sale along with other extra parts. It’s an aftermarket color called Flame Red.
I heard there was a guy that made reproduction trim parts but didn’t know the website, thanks for the link. I’ll contact him check if he makes the parts I’m missing. The carburetor was rebuilt but I haven’t gotten around to properly adjusting the choke yet, which I think is the main reason for the starting issues, although it is still on its points ignition system.
The caps look almost identical to the ‘56 Fiesta caps, I thought the exact same thing, but after doing some research found out that it’s these aftermarket ones here: https://www.speedwaymotors.com/Tri-Bar-Spinner-Style-15-Inch-Wheel-Cover,35400.html?
They make 14 inch ones too, I need to measure mine to see which if the two they are. The original hubcaps were stolen while it was being worked on by the husband of the original owner’s daughter after she passed and before he sold it. A lot of components were taken including all the AC stuff and original Wonder Bar Radio. I bought a set of the right caps but I didn’t get the clips yet. I saw Fusick makes them, but I find it hard paying 200 bucks for them. I don’t think the wheels are original and don’t know if they’re sized properly for the hubcaps yet.
Yes I heard I need both booklets. I haven’t gotten around to doing a good search on those yet. Good to know that I need to find originals.
Yup, it still has the original Rochester 4GC. What makes you think it’s got a fuel injection just out of curiosity? I’m trying to figure out all that shouldn’t be in the engine bay that I need to replace to get it as original as possible.
Welcome. The car is beautiful and has the history! I wish you many happy miles..
It appears to have had the steel line between the fuel pump and the carburetor replaced with rubber hose and a filter. The steel line is safer from a leak/fire perspective, consider changing it back to steel. Rubber is fine on the suction side of the pump, not on the pressure side.
It appears to have had the steel line between the fuel pump and the carburetor replaced with rubber hose and a filter. The steel line is safer from a leak/fire perspective, consider changing it back to steel. Rubber is fine on the suction side of the pump, not on the pressure side.
You have a late build car so I figured it came Chariot Red. Garnet is a good color for a 62 though, and I see a lot more 62s with contrast color roof than I do with body and roof the same color.
Those tiny moldings are missing on a lot of 62 Starfires. I don't think he's made them yet but check with Oldskeeper here on CO, or his website is www.jaswest.com . Steve reproduces the aluminum side panels among other things for early 60s big Oldsmobiles.
Hard starting could be fuel, choke, or ignition related. Is car still on points ignition system or has it had an electronic conversion installed? Ethanol fuel will contribute to hard starting on a carbureted engine too.
Those look like aftermarket 56 Fiesta caps. They're probably on it because someone got tired of fooling with the 1962 clip-on full wheelcovers. That or it was changed to 15" wheels in an effort to find affordable tires.
JasWest or Fusick www.fusick.com are your best bets for what little is out there for your Starfire.
Those tiny moldings are missing on a lot of 62 Starfires. I don't think he's made them yet but check with Oldskeeper here on CO, or his website is www.jaswest.com . Steve reproduces the aluminum side panels among other things for early 60s big Oldsmobiles.
Hard starting could be fuel, choke, or ignition related. Is car still on points ignition system or has it had an electronic conversion installed? Ethanol fuel will contribute to hard starting on a carbureted engine too.
Those look like aftermarket 56 Fiesta caps. They're probably on it because someone got tired of fooling with the 1962 clip-on full wheelcovers. That or it was changed to 15" wheels in an effort to find affordable tires.
JasWest or Fusick www.fusick.com are your best bets for what little is out there for your Starfire.
I heard there was a guy that made reproduction trim parts but didn’t know the website, thanks for the link. I’ll contact him check if he makes the parts I’m missing. The carburetor was rebuilt but I haven’t gotten around to properly adjusting the choke yet, which I think is the main reason for the starting issues, although it is still on its points ignition system.
The caps look almost identical to the ‘56 Fiesta caps, I thought the exact same thing, but after doing some research found out that it’s these aftermarket ones here: https://www.speedwaymotors.com/Tri-Bar-Spinner-Style-15-Inch-Wheel-Cover,35400.html?
They make 14 inch ones too, I need to measure mine to see which if the two they are. The original hubcaps were stolen while it was being worked on by the husband of the original owner’s daughter after she passed and before he sold it. A lot of components were taken including all the AC stuff and original Wonder Bar Radio. I bought a set of the right caps but I didn’t get the clips yet. I saw Fusick makes them, but I find it hard paying 200 bucks for them. I don’t think the wheels are original and don’t know if they’re sized properly for the hubcaps yet.
If you have a good non-rotted rear bumper and the SlimJim functions reasonably well you're way ahead of the game with this Starfire. You need these if you don't already have them. Both of them, preferably original print copies. Reprints and CD-ROM copies lose critical detail. Same books the dealer mechanics used to service your Starfire 60 years ago.
Last edited by Telstar; October 7th, 2023 at 11:13 PM.
#16
First off, thank you all for the warm welcome, advice, and kind words! I’m liking this place already.
Wow, didn’t even know these had that steel line, there’s a lot that’s not perfect or original in my engine bay. I looked up pictures and saw exactly what you mean. I’ll need to look into finding that part but I bet that’s near impossible.
Yup, it still has the original Rochester 4GC. What makes you think it’s got a fuel injection just out of curiosity? I’m trying to figure out all that shouldn’t be in the engine bay that I need to replace to get it as original as possible.
Wow, didn’t even know these had that steel line, there’s a lot that’s not perfect or original in my engine bay. I looked up pictures and saw exactly what you mean. I’ll need to look into finding that part but I bet that’s near impossible.
Yup, it still has the original Rochester 4GC. What makes you think it’s got a fuel injection just out of curiosity? I’m trying to figure out all that shouldn’t be in the engine bay that I need to replace to get it as original as possible.
Was going by fuel line routing and what appears to be a PCV hose routed to front of carb. Oldsmobile routed it to a port on the back of the throttle plate. A 1962 CA car would have come with a PCV setup; if this one moved into CA it may have had a retrofit kit installed.
Edelbrock AFB is a 4 barrel carburetor patterned after the original Carter/Federal-Mogul AFB carbs. I don't know what you'd get into trying to make a HydraMatic work with an EFI conversion. I know people who have pulled it off using the E-brock carb, but it entailed a whole lot of trial and error.
You may have to fabricate your own steel fuel line. Best thing would be find the steel lines and glass bowl fuel filter from a parts car. It can come from any 62 (and probably 61) 4-barrel 394 which Super 88 and Ninety Eight also used.
#17
Was going by fuel line routing and what appears to be a PCV hose routed to front of carb. Oldsmobile routed it to a port on the back of the throttle plate. A 1962 CA car would have come with a PCV setup; if this one moved into CA it may have had a retrofit kit installed.
Edelbrock AFB is a 4 barrel carburetor patterned after the original Carter/Federal-Mogul AFB carbs. I don't know what you'd get into trying to make a HydraMatic work with an EFI conversion. I know people who have pulled it off using the E-brock carb, but it entailed a whole lot of trial and error.
You may have to fabricate your own steel fuel line. Best thing would be find the steel lines and glass bowl fuel filter from a parts car. It can come from any 62 (and probably 61) 4-barrel 394 which Super 88 and Ninety Eight also used.
Mine is a BC-coded Southgate California assembled vehicle, but the PCV setup was already routed to the front when I bought it. I didn't know they were originally routed to the rear of the plate, I'll need to do some more research into that and how that's done, as the majority of the pictures I've seen are all routed to the front. I also found this link here, which claims to be the right metal fuel hose for '61-64 Oldsmobiles, which looks correct but I want to verify before I purchase anything.
Also going way back, you mentioned the importance of both the 1961 and 1962 shop manuals, and I've found an eBay store that has both the ones in the images you posted, but also this 1961 Starfire supplement booklet. Is this necessary to have too?
#18
The 61 SF Supplement was issued when the Starfire was introduced in January 1961. I don't think there's anything in it that applies to 62 but if you can get it cheap enough it won't hurt to have it. The 62 manual covers only things that changed for the 1962 model year. 61/62 is the only time Olds issued a service manual that required the previous year's issue to cover everything.
#22
Welcome Aboard…. Great site with a lot of knowledgeable people…
The undisputed # 1 is Joe Padavano…
Right behind him is Charlie Jones…..
I have a lot of parts for your ride —- mechanical, NEW and N.O.S……
( Nothing in the Used world… )
In my estimation / my opinion —- the 1962 Oldsmobile Starfire is
Oldsmobile’s most glorious and most stylish car ever…
Congratulations, Craig…..
The undisputed # 1 is Joe Padavano…
Right behind him is Charlie Jones…..
I have a lot of parts for your ride —- mechanical, NEW and N.O.S……
( Nothing in the Used world… )
In my estimation / my opinion —- the 1962 Oldsmobile Starfire is
Oldsmobile’s most glorious and most stylish car ever…
Congratulations, Craig…..
#24
Your car must have 15" wheels on it since it has 56 Starfire wheel covers on it. The 62 came with 14" wheels. Just my opinion but I think the 62 Starfire wheel covers look lots better.
#25
#26
The front of the base has the vacuum line from the passenger side rocker cover and the rear of the cab has the hose to the vacuum tank and the steel line from the vacuum side of the dual action fuel pump. I would have to check but I think there is also a line to the distributor for vac advance.
The hose for the front should be a formed hose but finding a good one will be a challange.
Steve
The hose for the front should be a formed hose but finding a good one will be a challange.
Steve
#28
Welcome Aboard…. Great site with a lot of knowledgeable people…
The undisputed # 1 is Joe Padavano…
Right behind him is Charlie Jones…..
I have a lot of parts for your ride —- mechanical, NEW and N.O.S……
( Nothing in the Used world… )
In my estimation / my opinion —- the 1962 Oldsmobile Starfire is
Oldsmobile’s most glorious and most stylish car ever…
Congratulations, Craig…..
The undisputed # 1 is Joe Padavano…
Right behind him is Charlie Jones…..
I have a lot of parts for your ride —- mechanical, NEW and N.O.S……
( Nothing in the Used world… )
In my estimation / my opinion —- the 1962 Oldsmobile Starfire is
Oldsmobile’s most glorious and most stylish car ever…
Congratulations, Craig…..
And thank you to OldsKeeper and Charlie Jones for the additional information, that'll come in handy.
Last edited by Telstar; February 3rd, 2024 at 03:27 PM.
#30
Not sure how I missed this thread for so long but:
Welcome aboard and congratulations on your good taste in large Oldsmobiles. That is a nice looking car, does it drive well? If you have not already done so see Charlie and join "The Darksiders" Looking forward to following your progress.
Welcome aboard and congratulations on your good taste in large Oldsmobiles. That is a nice looking car, does it drive well? If you have not already done so see Charlie and join "The Darksiders" Looking forward to following your progress.
Thread
Thread Starter
Forum
Replies
Last Post
93celicaconv
Other Oldsmobiles
5
July 28th, 2023 04:19 PM