Heater Box Restoration
#1
Heater Box Restoration
I am in the middle of restoring my heater box.
One question I have is about the gaskets used.
Does anyone have pictures of the different gaskets and where they were installed?
One question I have is about the gaskets used.
Does anyone have pictures of the different gaskets and where they were installed?
#5
When I redid my 72's heater box, I pretty much used 3M strip calk only, as well as with the AC box. Mine still had intact foam around the evap, so I left that alone. When one strip of the stuff wasnt enough, I braided two together for a thicker rope. The factory used a similar stuff.
#6
when i redid my 72's heater box, i pretty much used 3m strip calk only, as well as with the ac box. Mine still had intact foam around the evap, so i left that alone. When one strip of the stuff wasnt enough, i braided two together for a thicker rope. The factory used a similar stuff.
Thread
Thread Starter
Forum
Replies
Last Post
Del70
Small Blocks
15
July 21st, 2020 11:42 AM
jeffs 89 cutlass salon
Chassis/Body/Frame
9
October 22nd, 2007 12:46 PM