cutlass650

I got a 1970 Cutlass Convertible. Looking to do a swap. Has anyone done an LS2 6.0 4L80E swap? Wondering what are the best engine mounts? transmission mounts? and a good place to get them from? Also with the 4L80E transmission swap do you have to cut the transmission tunnel to get it to fit with a good drive line angle?

70cutty

Use Holley everything. here is my thread on the swap.

https://classicoldsmobile.com/forums...-parts-148422/

cutlass650

Thanks. How's the oil pan clearance from cross member. My cousin has the 70 cutlass with LS2 4L80E but his looks like the oil pan is touching the cross member and he has a vibration at around 45 mph. Trying to avoid all that.

70cutty

No issues with clearance.

cutlass650

Do you happen to have any pictures of the oil pan clearance from the cross member? You had some pictures on your thread but it really didn't show the oil pan and the cross member.

cutlass650

Also do you have happen to have the part number for the transmission mount you used? I know you stated that it was a OEM F Body mount but that also bought from Holley/ Hooker?

70cutty

Here are some pictures of the pan clearance. If you need more let me know and I'll snap a few.

cutlass650

These are perfect! Thank You. No interference problems at all.

70cutty

Transmission mount is Anchor 2817