2blu442

Sorry guys, work hit one of those crazy periods.

Kevin, have you checked out the parts Chris has yet? Since he's much closer I think it would be worth your while to consider his before mine.

joebordem, what's your location? I do have a 1972 Cutlass S parts car with a rust free passengerside quarter panel. If your close enough you'd be welcome to help me cut it off and make sure you get what you need.

Tom, I've got some 1970 fenders but they've got the common rust in the lower portion behind the wheelwell. Where are you located?

bowlermt

Im in need of full drivers side quarter panel
any help would be nice

wills30

do you have any rusty 68 core supports and how much . i dont want to take mine out , i another so i can use it as a core to make an alum. one thanks

ragtop olds

need rear wheel lip mldgs for 70 /72 vista wagon. top dollar paid , plus any wrapping shipping cost.

ragtop olds

in the picture of the 65 qtr panel , i see a cowl section. is that a 65 non a/c ?? i need a non ac firewall section for a gto that i am doing , that was a/c car. if you want to trim it down to the firewall , let me know what you would want for it.

Al Godon

Is that red panel laying down in the grass, a 68-69 quater panel? If so what is the condition and price?
P1010243.jpg

2blu442

bowlermt, sorry I don't have a 1967 quarter panel at this time.

wills30, yes I have a 1968 core support but its large and shipping would be spendy. What's your location? If you've not created a parts wanted thread yet give that a try, but also post your location or the nearest large city.

ragtop olds, we may have talked already about the Vista wheelwell trim. I should have it but thought it was the same as the Cutlass S. Would you create a thread asking that question for others to comment on?
Yes I have a non-AC cowl from a 1965 but had planned to use the window channel in a project car. How much of the cowl did you need? What's your location to get a idea on shipping costs?

Al, yes the quarter panel is from a 1969 and it has a good wheelwell lip but rust along the bottom of the quarter and near the tail light location. I saved it mostly for the wheel well lip. John

schlitzguzzler1

I am looking for straight driver quality front and rears.
Thank you
Dan Scott

Al Godon

Can you get me close up pictures?

2blu442

Dan, the extra rear bumper isn't rusty but it's got dents. The extra front bumper has rust under the double thick section where the frame mounts. Sorry, nothing good enough to be driver quality.

Al, I'll try to get some photos of the quarter panel for you.

therobski

I need to find a replacment of this "LIP" hard to describe, accross the rear end between the taillights.If you call me 214-912-6336 I may beable to describe this piece better Robert. IMG_0267.jpg IMG_0266.jpg

2blu442

Hi Rob
I know the panel, I cut one out for Ralph over in Germany last year or the year before. I have a partial of this panel, but not the full width. When I cut the quarter panels off I left about 16" of this piece with each side. Here's a couple photos of the part in the middle. Let me know if this would help you.

P1010051-1.jpg

P1010053-1.jpg

P1010054-1.jpg

Al, here's a couple pictures of the quarter panel. I've got a few more posted on my photobucket site if you want to view them there. http://s90.photobucket.com/albums/k2...42/1969%20442/

P1010061.jpg

P1010063.jpg

P1010062.jpg

ntrl1one

Need a left side 72 Cutlass fender. Got one for sale? zip 44641 email me. Thanks in advance!

rn_mccy

Looking for 69 cutlass core support and also a hood

2blu442

ntrl1one, I've got fenders but its likely they'll all need a patch panel between the wheelwell and the door. If that will work for you I'll get some photos for you to check out.

m_mccy, I've got a core support but not the hood. Large items like this can be spendy to ship. I'd encourage you to post your city/state in your profile then create a parts wanted ad in that forum. Maybe I'm the closest one with the parts, or maybe someone right across town from you has them! I'll still get some pictures of the core support for you to consider. John

Fakser

1969 roof? if so can you post a pic been trying to find one for a while

2blu442

I've got a 1968 roof, but have been saving it for the 1968 442 cannibal car. I'm not sure I've got the time/skills to put this car back together. But I'd hate to cut it up and make it go away forever.

There was a 1969 Cutlass shell for sale on Craigslist for the last several months. Somewhere in the bay area. I just went through several cities and couldn't come up with it. If you have time, you might search the northern California and Nevada Craigslists. John

Kace

John, Do you go to the Carlisle, PA swap meet? There's one in spring and fall. K.C.

CutlassLegend

could you give me a price including shipping to CT 06417 for 68 fenders and quarters if you have them.

2blu442

Kace, sorry I didn't see your message before. I'm on the West Coast and have never made it to Carlisle. I've heard enough about it that I'd like to check it out it someday!

CutlassLegend, I'll look but don't think I have the parts you need.

John

Tony72Cutlass'S'

If only i lived on the west coast again, John, you have so many awesome parts, i've been looking far-and-wide here in the Quebec/vermont/NH area and can't find a good 72 hood for anything..

Thanks for posting, perhaps some day i'll road-trip it down and bring a 20 foot trailer with me :P

cheers,

Tony

hvysupreme

Would you happen to have a good decklid for 71 supreme conv?

DouglasOliver

John -

1.) I'm also looking for a 1969 cowl

2.) 1969 front bumper (f-85)

3.) 1969 rear bumper 442 (with exhaust cut-outs)

Thx!

bluecab

Hi John,
Looking for good straight bumpers for a '66 toro and a decklid without rust.
Also a bunch of small stuff, but I don't have a list together just yet.
Thanks,
David

2blu442

Douglas, I may have an extra core rear bumper, I need to check.

David, I know I've got a rear bumper thats solid but it would need replated to be nice. I've got a couple deck lids, I think they have light rust in places. I'll try to get some pictures for you to consider this weekend. Your welcome to send me a list when you are ready but I'd also encourage you to create a parts wanted ad. In the past there have been several members here with early Toronado parts cars. John

middlebrookgt

I need a decent decklid for a 72 2-dr notchtop supreme, light rust is fine, even if a small patch is needed. Shipped to 29369 - all the way across the country, but I havent found one close to local. Also would love a driver side fender in similar condition. I can Paypal right away or whatever payment method you prefer. Steve

2blu442

Hi Steve
I've got a Supreme deck lid with the lock punched... and one with a good lock but dents. If you want to see pictures of these I can send you some this weekend. I've also got most of the fenders pictured in the beginning of this thread. If you don't mind a patch panel I can provide you with one of those. John

DouglasOliver

Hi John...tried to send you a PM, but it says your mailbox is full. Just wanted to let you know i am definitely interested in the console.

Doug

costpenn

Would you have a 70-72 driver,s side black wheel well in really nice shape? Would like an original 455 car one that doesn't have the holes for the washer bottle

middlebrookgt

I'd like the lid with the lock punched, John. Please let me know a price to have it shipped to South Carolina, 29369.
I'll watch this thread or 864 237-2390 and how you'd like me to send funds. Thanks, Steve

Moose2

I'm looking for a couple of trim parts for my 66 Starfire. (1) original front fender-mounted radio antenna (not a power antenna) complete. (2) trunk lock decorative cover with rotating olds-badge door (don't care about the lock, just the decorative surround/cover plate.

Neither has to be pristine, I'll settle for functional. Can you help? If not, do you know where I might look?

Thanks for helpiing, I'm new to this site........
Mike

WoofWagon

I need the spare tire wheel well for my 70 Vista Cruiser. Mine is all rusted through.

OLDSMORAT

i need a right front fender brace. from the fender to the core support. need it bad
thank you

2blu442

costpenn, I may have one that's faded but doubt I have one with a nice black color to it. Let me know if you'd consider one like that.

Steve, I took some pictures last weekend but have been working long hours. I'll try to get them uploaded to you soon.

Mike, welcome to the site! I'm sorry I don't have any Starfire parts. If you haven't created a parts wanted post yet I'd encourage you to. In the past year I believe there's been a couple members with that vintage of Starfire parts for sale.

WoofWagon, sorry I don't have what you need either. If it's not the complete bottom you may be better off fabricating a patch out of sheetmetal. If you don't want to go that route yet then try creating a parts wanted post.

OLDSMORAT, I may have one that's cracked and needs welded but is solid and not thin or rusty. I'll look this coming weekend and send you photos of what I come up with. If you've got some welding skills you may be able to fabricate this from an old piece of sheetmetal. John

OLDSMORAT

Send me pics and what you have. I just need one

2blu442

Just wanted to say that my job has been busy this summer, and will probably be busy for another month or so. If I failed to reply to anyone I'm sorry. If you still need help with anything let me know... then gently NAG me to make sure I don't forget about you again!

John

scottymo78

Hello John...have a 1965 2door Dynamic 88 coupe
was looking for a Trunk lid and front fenders and if possible drivers side rear quarter panel...
let me know if you could help me out with any of this..
thanks
Scott

2blu442

Hi Scott
I'm sorry, but I don't have any sheetmetal for your 1965 Dynamic.
John

lou tecco

Looking for 64 olds cutlass driver side rear quater pannel arch or patch pannel
loutecco@comcast.net

Louis

John, would you have some passenger side quarter that I could use to repair the wheel arch on my '72 Cutlass Supreme Convertible? I wouldn't be needing a whole quarter or even a quarter panel.

Does anyone know if those arches are the same for other years or models?

Thanks,
Louis