monzaz

I have a FULL SIZE car posi rebuilt rear end
Fits B-body GM Full size cars
NEW 3.55 Gears
31 spline bolt in axles
8.875 (10 bolt cover 12 bolt guts)
Optional 12" backing plates drum brake system
Housing blasted primed and painted

MAy fit other years earlier 65 66 67 with some lower control arm mods.

1299.00

I can ship just ask for a quote

Thanks, Jim
J D
330 990 8155

oldsmobilty

DO you have a full frame for a a full size convertible. The only reason I as is most of the time these rearends come out of convertibles

Jaybird

monaza: I bet you haven't heard many guys tell you that you have a nice rear end?
Good Gawd man! My '67 Delta 88 with 3:08 gears burns enough gas. I can just imagine what my gas millage would be with your rear end!
With that said, I am very tempted to take this hunk of metal off your hands!

Oldsmaniac

Not to hijack the thread but I think you need that hunk of steel too Jay!.. Would be a real kick in the Azz for your boat and would enable it to surprise a lot of the leaner musclecars. Monaz I thought this rear would be a direct bolt in for 65 to 70 B bodies?? However I bought a 1o bolt out of a Pont 65 2+2 and the rear measures different than my 66 Delta rear and lower control arms/shouck mounts are at a different angle...

monzaz

sHOULD WORK WITH SOME SMALL MODS ...sMALL PRICE TO PAY FOR REARS THAT ARE just not out there. jIM

Crap... Not yelling just the caps lock was on. Jim

Title also states 68 69 70 too.

DennisG.

Hey Jim. Where did you get new 3:55 gears from and can you get more ? How much, just the ring & pinion ? And will these fit a 2:73 geared carrior ?

FYI. I have the 10 bolt cover, 12 bolt carrior, Pontiac rear end in my 73 Vista Cruiser.

copper128

Fabcraft Metal Works sells the new 3.55's for the big P rear.

monzaz

Yep that is the place- I have them also. 459.00 a set-

10.00 -35.00 shipping depends. with original box with out original box and distance from 44286. Jim

J D
330 990 8155

carrier fitment- Yes I am pretty sure brad made the gears to fit the 2.73-2.93 3.08 carrier

J-(Chicago)

I'm going to go out on a limb and guess there's no gears like this for the bigger 12 bolt of the same vintage? (The one with the 1.88 pinion shaft)