70 Cutlass convertible & 72 Cutlass S
#1
70 Cutlass convertible & 72 Cutlass S
greetings !
I'm going to offer up any of my parts or parts cars for a decent 1970 OAI hood!
I also have a storage unit full of 70 - 72 fenders, hoods, glass (door glass and rear window for 70 - 72 Cutlass S), tons of chrome (wheel well and others), a rebuilt 350 motor (7a heads), a TCI 350TH transmission, 2 x 455 intake manifolds (1 is for auto and the other is for 4 speed car), D heads and more. There are also two pairs of bucket seats (both need recovering but are complete with nice headrests), 71 bench seat with fold down arm (nice), rear seats out of 70-72 hardtops and convertibles. many more boxes full of windlace, some very nice door panels and boxes full of many other parts !!
I would be willing to deal generously with someone who has a good 70 OAI hood to trade. Once I am able to source the parts I need to finish my Rallye restoration, I'll be looking to sell out ALL my inventory to whoever is interested !
thanks
I'm going to offer up any of my parts or parts cars for a decent 1970 OAI hood!
I also have a storage unit full of 70 - 72 fenders, hoods, glass (door glass and rear window for 70 - 72 Cutlass S), tons of chrome (wheel well and others), a rebuilt 350 motor (7a heads), a TCI 350TH transmission, 2 x 455 intake manifolds (1 is for auto and the other is for 4 speed car), D heads and more. There are also two pairs of bucket seats (both need recovering but are complete with nice headrests), 71 bench seat with fold down arm (nice), rear seats out of 70-72 hardtops and convertibles. many more boxes full of windlace, some very nice door panels and boxes full of many other parts !!
I would be willing to deal generously with someone who has a good 70 OAI hood to trade. Once I am able to source the parts I need to finish my Rallye restoration, I'll be looking to sell out ALL my inventory to whoever is interested !
thanks
Last edited by rallye350; August 15th, 2009 at 11:29 AM. Reason: SP
#2
conv interior rear quarter tins
I'm looking for rear interior quarter panels, all I need are the metal tins! I ordered rear unassembled panels, and my old panels are aftermarket (fiberglass) they are so brittle that I can't rivet the window fuzzy to them. HELP!!!! Mike Mpls,Mn.
#5
Just an Olds Guy
Join Date: Jul 2008
Location: Edmonton, AB. And "I am Can 'eh' jun - eh"
Posts: 24,525
What do you have in the way of 10 bolt posi carriers? My car is a 1972 Cutlass S. I'm looking for a Series 3 carrier with casting 410408 to go with 3:42 gears. Shipping shouldn't be too bad. Could use Greyhound to go across Canada. I'm in Alberta. You can PM me with info.
#6
What do you have in the way of 10 bolt posi carriers? My car is a 1972 Cutlass S. I'm looking for a Series 3 carrier with casting 410408 to go with 3:42 gears. Shipping shouldn't be too bad. Could use Greyhound to go across Canada. I'm in Alberta. You can PM me with info.
#8
71-72 parts request
im trying to locate an ashtray door for my 71 convert. the dash is black, and also it has cruise control and the switch on the signal lever is broken. i've had a few guys give me some ideas on how to fix it until i can find something. my car also has a power drivers seat. the track was very rusted and even after an attempt to repair it its still stiff. if you have any of these parts or would be able to send me in a direction to some one who does it would be awesome. thanks jake g.
#10
#11
Just a quick update on some of the parts I still have available for sale.
- set of 455 E heads (cores)
- set of 1969 #5 350 Ramrod heads. Still in the box that they were received in 20 years ago (totally redone- ready to drop in). Been stored inside since day one.
- mint set of 72 Chevelle bucket seats (with rear bench) - MINT !!!
- set of 1970 350 exhaust manifolds
- 2 nice 69 Olds hoods
- a VERY MINT 1970 hood (soda blasted and ready to paint)
- nice 71 hood
- 2 1970 Olds driver side fenders (one from a 442 and the other from a Rallye 350)
- MINT 1970 front bumper of a Rallye 350
- assorted 71/72 front & rear bumper
- MINT 1970 Cutlass convertible trunk lid
- boxes of centre caps for SS rims (both clip on & bolt on - all are driver quality)
- front & rear window chrome for 70-72 Cutlass/442
- complete MINT A/C system (and I mean complete from dash controls to front evaporator, condenser, hoses, wiring..etc) from a 70/72 Cutlass
I am located in the Toronto area and I encourage all those in the southern Ontario, Buffalo, Niagara Falls & Fort Erie areas to come out and see what's there. Guaranteed you will find the best prices you've seen anywhere (or at any flea market !). I have been collecting for over 10 years and now it's time to clean house so I am looking to get rid of ALL my stuff !! Any reasonable offer will not be refused. I still have a large assortment of other parts that I'm still going thru to see what's there?!
Cheers
- set of 455 E heads (cores)
- set of 1969 #5 350 Ramrod heads. Still in the box that they were received in 20 years ago (totally redone- ready to drop in). Been stored inside since day one.
- mint set of 72 Chevelle bucket seats (with rear bench) - MINT !!!
- set of 1970 350 exhaust manifolds
- 2 nice 69 Olds hoods
- a VERY MINT 1970 hood (soda blasted and ready to paint)
- nice 71 hood
- 2 1970 Olds driver side fenders (one from a 442 and the other from a Rallye 350)
- MINT 1970 front bumper of a Rallye 350
- assorted 71/72 front & rear bumper
- MINT 1970 Cutlass convertible trunk lid
- boxes of centre caps for SS rims (both clip on & bolt on - all are driver quality)
- front & rear window chrome for 70-72 Cutlass/442
- complete MINT A/C system (and I mean complete from dash controls to front evaporator, condenser, hoses, wiring..etc) from a 70/72 Cutlass
I am located in the Toronto area and I encourage all those in the southern Ontario, Buffalo, Niagara Falls & Fort Erie areas to come out and see what's there. Guaranteed you will find the best prices you've seen anywhere (or at any flea market !). I have been collecting for over 10 years and now it's time to clean house so I am looking to get rid of ALL my stuff !! Any reasonable offer will not be refused. I still have a large assortment of other parts that I'm still going thru to see what's there?!
Cheers
#12
cruise control/signal switch
im still hoping to locate a signal switch/w cruise control for a 71 cut. supreme. if anyone knows the where abouts to one or anyone who reproduces one i'd appreciate it. my email is jasag24@yahoo.com
o and the convert is coming along nicely. paint is on and time to put it back together. good winter project looking forward to the road in the spring. i'l post pics soon.
thanks jake
o and the convert is coming along nicely. paint is on and time to put it back together. good winter project looking forward to the road in the spring. i'l post pics soon.
thanks jake
#13
Just an Olds Guy
Join Date: Jul 2008
Location: Edmonton, AB. And "I am Can 'eh' jun - eh"
Posts: 24,525
im still hoping to locate a signal switch/w cruise control for a 71 cut. supreme. if anyone knows the where abouts to one or anyone who reproduces one i'd appreciate it. my email is jasag24@yahoo.com
o and the convert is coming along nicely. paint is on and time to put it back together. good winter project looking forward to the road in the spring. i'l post pics soon.
thanks jake
o and the convert is coming along nicely. paint is on and time to put it back together. good winter project looking forward to the road in the spring. i'l post pics soon.
thanks jake
#14
I've added some "asking prices" for those who want to see some numbers! As always, any reasonable offers will not be refused!
- set of 455 E heads (cores) - SOLD !!
- set of 1969 #5 350 Ramrod heads. Still in the box that they were received in 20 years ago (totally redone- ready to drop in). Been stored inside since day one. $800
- mint set of 72 Chevelle bucket seats (with rear bench) - MINT !!! $1200
- set of MINT 1970 350 dual exhaust manifolds $300
- 2 nice 69 Olds hoods $200
- a VERY MINT 1970 hood (soda blasted and ready to paint) $200
- nice 71 hood $150
- 2 1970 Olds driver side fenders (one from a 442 and the other from a Rallye 350) $250
- MINT 1970 front bumper of a Rallye 350 $300
- assorted 71/72 front & rear bumper $100 - $250
- MINT 1970 Cutlass convertible trunk lid $400
- boxes of centre caps for SS rims (both clip on & bolt on - all are driver quality) $5 - $40 each depending on style and condition
- front & rear window chrome for 70-72 Cutlass/442 best offer
- complete MINT A/C system (and I mean complete from dash controls to front evaporator, condenser, hoses, wiring..etc) from a 70/72 Cutlass $600
- wheel well molding for 68 - 72 Cutlass & Cutlass Supreme $5-$50 each depending on style & condition
I am located in the Toronto area and I encourage all those in the southern Ontario, Buffalo, Niagara Falls & Fort Erie areas to come out and see what's there. Guaranteed you will find the best prices you've seen anywhere (or at any flea market !). I have been collecting for over 10 years and now it's time to clean house so I am looking to get rid of ALL my stuff !! Any reasonable offer will not be refused. I still have a large assortment of other parts that I'm still going thru to see what's there?!
Cheers
- set of 455 E heads (cores) - SOLD !!
- set of 1969 #5 350 Ramrod heads. Still in the box that they were received in 20 years ago (totally redone- ready to drop in). Been stored inside since day one. $800
- mint set of 72 Chevelle bucket seats (with rear bench) - MINT !!! $1200
- set of MINT 1970 350 dual exhaust manifolds $300
- 2 nice 69 Olds hoods $200
- a VERY MINT 1970 hood (soda blasted and ready to paint) $200
- nice 71 hood $150
- 2 1970 Olds driver side fenders (one from a 442 and the other from a Rallye 350) $250
- MINT 1970 front bumper of a Rallye 350 $300
- assorted 71/72 front & rear bumper $100 - $250
- MINT 1970 Cutlass convertible trunk lid $400
- boxes of centre caps for SS rims (both clip on & bolt on - all are driver quality) $5 - $40 each depending on style and condition
- front & rear window chrome for 70-72 Cutlass/442 best offer
- complete MINT A/C system (and I mean complete from dash controls to front evaporator, condenser, hoses, wiring..etc) from a 70/72 Cutlass $600
- wheel well molding for 68 - 72 Cutlass & Cutlass Supreme $5-$50 each depending on style & condition
I am located in the Toronto area and I encourage all those in the southern Ontario, Buffalo, Niagara Falls & Fort Erie areas to come out and see what's there. Guaranteed you will find the best prices you've seen anywhere (or at any flea market !). I have been collecting for over 10 years and now it's time to clean house so I am looking to get rid of ALL my stuff !! Any reasonable offer will not be refused. I still have a large assortment of other parts that I'm still going thru to see what's there?!
Cheers
Last edited by rallye350; November 26th, 2009 at 11:15 AM. Reason: updates
#15
im still hoping to locate a signal switch/w cruise control for a 71 cut. supreme. if anyone knows the where abouts to one or anyone who reproduces one i'd appreciate it. my email is jasag24@yahoo.com
o and the convert is coming along nicely. paint is on and time to put it back together. good winter project looking forward to the road in the spring. i'l post pics soon.
thanks jake
o and the convert is coming along nicely. paint is on and time to put it back together. good winter project looking forward to the road in the spring. i'l post pics soon.
thanks jake
Hey Jake,
I've been told my car has a 1971 turn signal w/ cruise stem. Evidently the 70 version has a chrome plastic ****, whereas, the 71 has a black plastic ****.
Mine is in excellent condition, but I'd only be willing to trade or sell if I can locate a similar quality 1970 stem (w/ cruise).
#16
the one on my moms car is chrome stem with a black end where the push button is. the chrome is peeling off and the actually plactic handle is broken right where it goes into the metal signal lever. i've considered molding it all back together but know i cant replicate the chrome finish on the plastic. sounds like u have what i need i will keep my eye open and fingers crossed for you
#18
#19
70 Cutlass convertible and 72 Cutlass S for sale again
Update on the 70 Cutlass convertible and the 72 Cutlass S.
Buyer has lost storage space and is looking to sell or part the cars out.
Ad can be found here:
http://toronto.kijiji.ca/c-cars-vehi...AdIdZ175313041
Buyer has lost storage space and is looking to sell or part the cars out.
Ad can be found here:
http://toronto.kijiji.ca/c-cars-vehi...AdIdZ175313041
#21
I bought the PartsPlace steel/glass hood for now just so I could get my car finished. I'm currently looking for a capable bodyman in the gretaer Toronto area who can restore my original hood.
#22
Let me know (PM me) what you want for your PP hood if/when you decide to replace.
#24
Just an Olds Guy
Join Date: Jul 2008
Location: Edmonton, AB. And "I am Can 'eh' jun - eh"
Posts: 24,525
I called Parts Place a couple of times during the last 2 years. They say that they're "working" on a glass/steel OAI hood for the 71/72 models. I know they have a the full glass hood with functional air box, but that's not what I'm after. Anyone heard anything from any of the aftermarket suppliers. As of now, Thorntons has the monopoly on the steel/glass hood in very limited production.
#26
Just an Olds Guy
Join Date: Jul 2008
Location: Edmonton, AB. And "I am Can 'eh' jun - eh"
Posts: 24,525
Thanks boondocker,
The PP glass/metal hood is for a 70 Cutlass (729.00) and won't fit my 72. I've heard that the fitment on this hood has some issues that a bodyman would need to spend around 30+ hours on to get a perfect fit.
The "ram air" hood that PP advertises for 71/72 is completely made of fibreglas and is priced accordingly (589.00). It doesn't have a steel liner and that's important for me because I want to install a T44 hood lock to make sure the hood doesn't accidentally walk away. Only a hood with a steel liner will do the trick. In the meantime, I'll keep using the one I have with the fake louvers.
Thanks for your suggestion, I appreciate the thought behind it. As you know PP needs to update their promo words. The hood I'm looking for is a w-25 OAI (outside air induction). A lot of people mistakenly call it a ram air hood.
The PP glass/metal hood is for a 70 Cutlass (729.00) and won't fit my 72. I've heard that the fitment on this hood has some issues that a bodyman would need to spend around 30+ hours on to get a perfect fit.
The "ram air" hood that PP advertises for 71/72 is completely made of fibreglas and is priced accordingly (589.00). It doesn't have a steel liner and that's important for me because I want to install a T44 hood lock to make sure the hood doesn't accidentally walk away. Only a hood with a steel liner will do the trick. In the meantime, I'll keep using the one I have with the fake louvers.
Thanks for your suggestion, I appreciate the thought behind it. As you know PP needs to update their promo words. The hood I'm looking for is a w-25 OAI (outside air induction). A lot of people mistakenly call it a ram air hood.
#28
Just an Olds Guy
Join Date: Jul 2008
Location: Edmonton, AB. And "I am Can 'eh' jun - eh"
Posts: 24,525
PP W25 Steel/Glass Hood
The issue with fitment I got from 70Post (Patton Glade). He specializes in restorations. I hope the new hood doesn't fall into the same category or I'll have to start working a night job too!
Thanks again for your help, and keen eye.
#31
Just an Olds Guy
Join Date: Jul 2008
Location: Edmonton, AB. And "I am Can 'eh' jun - eh"
Posts: 24,525
Unfortunately we still have no date on when those will be available. I wish
I could tell you something but I have not heard anything for quite some time
on those. I assume they will be close to the same price at the 1970 hoods
for $729 but I am not positive. We are not taking preorders on them yet.
Sorry
Thanks
The Parts Place
630-365-1800
I could tell you something but I have not heard anything for quite some time
on those. I assume they will be close to the same price at the 1970 hoods
for $729 but I am not positive. We are not taking preorders on them yet.
Sorry
Thanks
The Parts Place
630-365-1800
#32
#34
Just an Olds Guy
Join Date: Jul 2008
Location: Edmonton, AB. And "I am Can 'eh' jun - eh"
Posts: 24,525
Do you have any decent 72 black door panels? I really only need a driver, but if you have a set I would be interested. I also would be interested in a driver quality outer door handles, and a sport steering wheel hub and horn button, and set of the quarter panel chrome trim pieces that complete the trunk edge chrome? Do you have any of this?
thanks
thanks
Thread
Thread Starter
Forum
Replies
Last Post
dz442
Parts For Sale
0
August 21st, 2013 07:35 AM
BIGJERR
Parts For Sale
0
June 1st, 2010 08:05 AM
many8
General Discussion
4
May 18th, 2008 06:26 PM