Camshafts
#1
Camshafts
i have 2 cams for sale. I have a low milage 280h comp cam 490/490 lift .230 duration @ .050 lift. has good wear pattern and the lifters to go with it.
The other cam i have is a lunati bracker master 2 cam 496/520 lift same as edelbrock rpm cam
$ 50 for the used comp cam that has under roughly 5k miles on it
$ 75 for the luntai it's brand new w/o lifters.
The other cam i have is a lunati bracker master 2 cam 496/520 lift same as edelbrock rpm cam
$ 50 for the used comp cam that has under roughly 5k miles on it
$ 75 for the luntai it's brand new w/o lifters.
#3
How lumpy are these cams? I am looking for a smooth idle as possible.
71 cutlass with 350 4 barrel.Gonna get a edelbrock intake for it. Gonna
rebuild bottom end .not sure what pistons yet, (flattop??)Also found original 1970 heads for it.Fairly new this olds stuff !!thanks
71 cutlass with 350 4 barrel.Gonna get a edelbrock intake for it. Gonna
rebuild bottom end .not sure what pistons yet, (flattop??)Also found original 1970 heads for it.Fairly new this olds stuff !!thanks
#4
They need 9.5 to 1 compression or better. the are both pretty lumpy and will need a higher stall speed converter etc etc. If you plan on rebuilding and going to a flat tops and some head work i would recommend either cam but this is not for a stock style rebuild with lower compression
Thread
Thread Starter
Forum
Replies
Last Post