Cutlass parts 66-72
May 18th, 2012, 05:54 PM
#1
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,950
Cutlass parts 66-72
Hi all. I am going to thin out a bunch of
stuff I have collected over the years to
try and finish up my 442 project.
Wheels, caps, door panels, a lot of
misc. parts, all Cutlass/442.
PM me with any of your needs and I
will begin the search! Some of the things
I would have no idea how to ship, mainly
sheetmetal and rearends. I have a few
offerings up on Austin TX CL, if anyone is
interested. Thanks, Adam.
stuff I have collected over the years to
try and finish up my 442 project.
Wheels, caps, door panels, a lot of
misc. parts, all Cutlass/442.
PM me with any of your needs and I
will begin the search! Some of the things
I would have no idea how to ship, mainly
sheetmetal and rearends. I have a few
offerings up on Austin TX CL, if anyone is
interested. Thanks, Adam.
May 18th, 2012, 08:38 PM
#5
Moderator
Join Date: Sep 2006
Location: Medford, Oregon
Posts: 13,719
Adam, fenders are easy to ship Greyhound bus lines. I'll raid the recycle bin behind an appliance store for a large box. Then cut it down and wrap it with the stretch wrap stuff. It has to go from bus station to bus station, but if you have the ability to transport it and the buyer can pick it up this works well. In the last couple weeks I've shipped one package with two 1965 fenders and another with a single 1971-72 fender. John
May 19th, 2012, 05:21 AM
#7
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,950
Chad, I will look. I have a left front from
a 70 442 that will need a little work, but
I don't think they are the same.
Are the 71's the same? I have a couple
over in Austin I need to pic up and bring home.
I belive they are 71's. I think all three are left's!
May 19th, 2012, 11:18 AM
#8
71 and 2 interchange. 70's will fit but the inner apron is visually different. Thanks for your time!
May 21st, 2012, 09:05 PM
#9
Hello, Im needing set of C heads for 69 Olds Supreme, AS well front and rear trim arpund windows. CHrome/Rubber guide between two piece window on door glass going to qrtr windows. Im also wanting posi rear end for this car Im unsure what bolt pattern is equiped this year and or gears??Wireing harnes for front and rear lights... THanks
May 22nd, 2012, 03:52 AM
#10
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,950
Hi Chris. As far as heads I have one G and one GA.
I think the only difference is the G is 71 and GA is a 72, not sure.
No on the posi. I will have to check on the harnesses, but I maybe
able to help you out on those. The chrome for the cpe. windows I
have, the rubber is no good. I will have to check on the windshield
moldings. I may not have complete sets.
I think the only difference is the G is 71 and GA is a 72, not sure.
No on the posi. I will have to check on the harnesses, but I maybe
able to help you out on those. The chrome for the cpe. windows I
have, the rubber is no good. I will have to check on the windshield
moldings. I may not have complete sets.
May 22nd, 2012, 06:49 PM
#12
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,950
May 23rd, 2012, 05:56 PM
#14
Registered User
Hey Tru Blue ..I am looking for a nice 67 Under Dash Harness.I am doing an IP restoration for a great guy .If you have any Decent Instrument Panels I am a buyer..66 or 67
May 23rd, 2012, 07:16 PM
#15
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,950
Mr. Roth this 67 didn't have much left when I got it.
Basically sheetmetal, and drivetrain. It did have some
harness however. I will have to look. I think the fusebox
and underdash wiring may be intact. It was an a/c car.
Will any of this help?
Basically sheetmetal, and drivetrain. It did have some
harness however. I will have to look. I think the fusebox
and underdash wiring may be intact. It was an a/c car.
Will any of this help?
May 24th, 2012, 05:50 AM
#16
Registered User
Join Date: May 2012
Location: Fl
Posts: 188
May 24th, 2012, 09:03 AM
#17
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,950
May 24th, 2012, 06:57 PM
#18
Registered User
Join Date: May 2012
Location: Fl
Posts: 188
May 24th, 2012, 07:20 PM
#19
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,950
How many sets do you need?
All 14's though. Some snap ons
some bolt on's. I have several sets
of SS1's also. I have a set of (2) LY
code SS1 chromies and (2) LE codes
to go with them.
The LY's are the one's for disc brakes.
May 25th, 2012, 04:53 AM
#20
Registered User
Join Date: May 2012
Location: Fl
Posts: 188
Hey tru how about u give me a call as I have a question or 2...772-626-6780 Thanx, Ace
May 28th, 2012, 04:49 AM
#23
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,950
May 28th, 2012, 04:59 AM
#24
Registered User
66 and 67
I would be interested in the under dash harness.If you have any decent Instrument panels I owuld be interested in those as well.
Thanks in advance.
Ron
Thanks in advance.
Ron
May 28th, 2012, 05:06 AM
#25
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,950
Ron, I am going over today to take a few pics of the r.r. qrt panel
for a fellow out of Midland. All that's left of the dash are the a/c vents.
The metal part is fairly rusted out at the windshield, Adam.
May 28th, 2012, 06:16 AM
#27
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,950
Hi Steve. I have several to chose from.
Some fair, some not so good.
Send me your e-mail address through pm,
and I will send you some pics. I haven't
been able to figure out how to thru CO. I think
it maybe my comp. If not it's me, ha ha, Adam.
Steve, I had to edit the post. Question: Are the Cutlass
and 442 grilles the same? All the ones I have are Cutlass.
Last edited by tru-blue 442; May 28th, 2012 at 06:18 AM. Reason: Question
May 28th, 2012, 10:56 AM
#28
Registered User
Join Date: Jun 2009
Location: Middleton Idaho
Posts: 56
I need the drivers side fender for the 68 the worst. I would like to get both due to the dreaded rust coming through the bottom of the passengers side. As far as trim pieces go, I am looking for what ever is available. Some of what I have may be dented or tweeked a little. I am missing a couple pieces such as the 67 is missing P/S front piece. But the rear ones are starting to get ugly.(little bubbles coming up) And I am missing some of the P/S rear trim pieces on the 68 due to an accident about 20 years ago. Both are cutlass supremes.
May 28th, 2012, 10:58 AM
#29
Registered User
Join Date: Jun 2009
Location: Middleton Idaho
Posts: 56
What are you asking for a Cutlass grill? They are different than a 442 grill as instead of just the up and down flat bars, a 442 grill has small square openings. Any other plastic pieces for like the headlights available?
June 1st, 2012, 09:24 AM
#30
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,950
June 3rd, 2012, 05:20 AM
#32
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,950
While digging around I found a set 69 442 grilles.
$75 plus the ride...
PM with an e-mail address and I will send
some pics, thanks.
$75 plus the ride...
PM with an e-mail address and I will send
some pics, thanks.
Last edited by tru-blue 442; July 15th, 2012 at 07:43 PM.
June 10th, 2012, 10:43 AM
#34
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,950
floor shifter
Opps. Sorry Freddy. I haven't got back to this thread in a while.
Yes, I have one, no shifter ball, harness or neutral saftey switch.
Actually, I don't know if the 70-72 had the n.s.s. on the shifter.
$45 plus the ride.
Yes, I have one, no shifter ball, harness or neutral saftey switch.
Actually, I don't know if the 70-72 had the n.s.s. on the shifter.
$45 plus the ride.
June 14th, 2012, 04:38 AM
#35
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,950
I found an almost nos front hood chrome
for a 67 Cutlass in the hoard. If interested,
pm me with an e-mail address, I will send on
some pics. $200 plus the ride, thanks guys.
for a 67 Cutlass in the hoard. If interested,
pm me with an e-mail address, I will send on
some pics. $200 plus the ride, thanks guys.
June 18th, 2012, 04:15 PM
#37
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,950
I was digging around again today...
I found a left and right set of
rear peak moldings for a 68-69 442
or Cutlass convertable.
They do have a few dings, but very workable.
E-mail with an address, I will send on some pics.
I think $300 plus the shipping is fair. Thanks again.
I found a left and right set of
rear peak moldings for a 68-69 442
or Cutlass convertable.
They do have a few dings, but very workable.
E-mail with an address, I will send on some pics.
I think $300 plus the shipping is fair. Thanks again.
Last edited by tru-blue 442; July 14th, 2012 at 04:58 AM.
July 14th, 2012, 10:19 PM
#39
Registered User
Join Date: Oct 2011
Location: El Paso, Texas
Posts: 441
I am looking for a 1968 (one year only) horn relay. it is specific for 1968 cutlass only for that year. looking for an original Delco Remy if u have one. also another one year only 1970 SSI Rim. This year was chromed only in the center part of the rim, the outer part was painted black or grey and took a trim ring. I need one of these in good shape 14X7 please let me know if you have either of these. Thanks a Heap1....Todd
toddvcarroll@hotmail.com
toddvcarroll@hotmail.com
July 15th, 2012, 06:42 AM
#40
Old School Olds
Thread Starter
Join Date: Nov 2008
Location: Marble Falls TX
Posts: 8,950
68 relay and wheel.
I am looking for a 1968 (one year only) horn relay. it is specific for 1968 cutlass only for that year. looking for an original Delco Remy if u have one. also another one year only 1970 SSI Rim. This year was chromed only in the center part of the rim, the outer part was painted black or grey and took a trim ring. I need one of these in good shape 14X7 please let me know if you have either of these. Thanks a Heap1....Todd
toddvcarroll@hotmail.com
toddvcarroll@hotmail.com
Todd, I sent pics to your e-mail of the relay and wheel.
Thanks, Adam.
